So, after selling my Flysky 9x i am looking for a new Transmitter for my kwads well purchased a taranis x9d plus which had some defects so returned and got refund so now its out of stock…

came across this beauty small gaming console look radio transmitter. It is only sold on Hobbyking and might be soon cloned and sold on Banggood or Aliexpress as the other models have been done like the I6 and 9x.

Great radio for the money, for beginners and seasoned racers.

Good for start for the budget yes the Rx is big but can be managed well if you are buying or thinking to buy this product i would say rather have a look on Flysky or Turnigy i6 and i6s Transmitters which are cheaper and better in this matter yes they are big with more weight but does the work for you and is a standard Radio.

fpvcrazy evol-300x220 Turnigy Evolution worth to buy??? (New Transmitter) All Topics Dronebuilds DroneRacing GUIDE TO BUY DRONE  turnigy evolution turnigy radio transmitter   fpvcrazy evol2-300x220 Turnigy Evolution worth to buy??? (New Transmitter) All Topics Dronebuilds DroneRacing GUIDE TO BUY DRONE  turnigy evolution turnigy radio transmitter   fpvcrazy evol3-300x220 Turnigy Evolution worth to buy??? (New Transmitter) All Topics Dronebuilds DroneRacing GUIDE TO BUY DRONE  turnigy evolution turnigy radio transmitter   fpvcrazy evolution-300x220 Turnigy Evolution worth to buy??? (New Transmitter) All Topics Dronebuilds DroneRacing GUIDE TO BUY DRONE  turnigy evolution turnigy radio transmitter

This is what i feel about the Turnigy Evolution Tx :

All below points are experienced from various videos and looking at the specs of the radio.


    1. Sticks are just too short for hybrid pinchers to get full throttle and pitch even when screwed out to just 3 turns on the screw.
    2. No neck strap loop. Could be an optional extra part that fits or a 3d model for printing.
    3. Stick springs could to be stiffer.
    4. Would be nice to have momentary buttons/switch for executing readouts.
    5. There are no triming switches for the gimbals.
    6. Has only 3 aux switches which makes the Tx very limited to indoor Fpv or racer class.
    7. Cannot be used for AP platforms as you obvsly. need more switches and modes and pots.
    8. Would be great if it showed battery voltage instead of a battery image.
    9. No range test mode (Not sure if this is a hardware or software limitation).
    10. Supports only 5 models so if you have more than 5 you need to keep a spare Tx.
    11. Rx of this Turnigy Evolution is hard to find also most of it is out of stock.
    12. Rx is bigger than a x4r.
    13. Gimbals of Turnigy Evolution are smaller than Taranis 9xd plus.
    14. No expo no rates change option in Menu.
    15. Speaker isnt that loud.


  1. small, light, cheap
  2.  decently constructed
  3.  pretty good gimbals, decent switches
  4.  rechargeable battery
  5.  basic voltage telemetry
  6. two internal antennas
  7.  usable touchscreen
  8.  come with receiver
  9. small in size light weight 345 gms.
  10. comes in white and black color.
  11. Good battery life.
  12. Inbuild lion battery
  13. backlight of gimbals change as you move the sticks.

Now this is what Hobbyking has on the product page .

Turnigy Evolution Digital AFHDS Radio Control System w/TGY-iA6C Receiver

The engineers at Turnigy have come up with another winner, the Turnigy Evolution. Designed with the FPV Drone flier squarely in mind, the Evolution features a striking new look and is amazingly compact. Its small size makes it very backpack friendly and the neat cover for the front of the controller keeps the face and gimbals safe during transportation.

The Evolution uses the solid and reliable 8 channel 2.4GHz Automatic Frequency Hopping Digital System (AFHDS 2A) spread spectrum technology, making it compatible with the iA6, iA6B, iA6C, i10 & i10B range of receivers. The system is supplied with the Turnigy TGY-iA6C Receiver for SBUS/IBUS and CPPM/PWM support.
Twin omnidirectional high gain antennas are built into the outer case to provide an even more secure radio link and to protect them from damage.

The ergonomically designed case makes for easy use of all controls. The switches and pots are all positioned for comfort and the adjustable length sticks can be tailored to your own requirements. Speaking of sticks, the high quality, ball bearing gimbals are clear and have color changing, programmable LEDs that can change color with the use of the sticks. There is a pop-up potentiometer that could be used for camera gimbal control. Two 3-position switches on the back can easily be set-up to change the flight modes.
A large monochrome backlit LCD Touch screen makes it easy to program and change the settings in both daylight and night-time.

5 model memories  make it easy when swapping from one model to next by simply selecting the appropriate model memory (assuming that you’ve bound the next receiver to the particular model memory first!)

Each transmitter and receiver has its own unique ID to prevent other RC systems from accidentally connecting to or interfering with the Evolution.
Each transmitter hops between 16 channels in order to reduce interference from other transmitters. There is even a mini USB port for easy charging via a power bank (power pack) or phone charger / USB charger / PC. This can also be used for updates (via PC) or to use the Evolution transmitter as a controller for your favorite RC simulator programs.

The Evolution comes in either Mode 1 and Mode 2 and is available in black or white for each mode.

• AFHDS 2A RF protocol
• Compatible with the iA6, iA6B, iA6C, i10 & i10B range of receivers
• 8 channel 2.4ghz radio with telemetry capability
• i10 style customized Gimbals with dual ball bearing supports
• Illuminated gimbals (adjustable)
• Soft rubber grips
• Easy to use touch screen
• SBUS/IBUS and CPPM/PWM support
• 5 Model Memory
• Backlit LCD Screen
• 4 Stick Mode Selection
• USB port for Flight Simulators
• USB changing

Transmitter  specs:
Channels: 8
Model type: Multi-rotor/Drone
RF range: 2.408~2.475 GHz
Bandwidth: 500 KHz
RF channel: 135
Protocol: AFHDS 2A
Modulation type: GFSK
Stick resolution: 4096
Low voltage alarm: Yes (<3.7V)
USB Port: Yes
Power input: 3.7V
Size: 179x81x161mm
Weight: 332g (without cover)
Certificate: CE0678, FCC ID:N4ZMT600, RCM

TGY-iA6C Receiver:
Channels: 8
Model type: Quadcopter/Fixed-wing/Helicopter
RF range: 2.408~2.475 GHz
RF channel: 135
RX sensitivity: -105dBm
2.4GHz system: AFHDS 2A
Modulation type: GFSK
Power input: 4 ~ 6.5V DC
Antenna length: 26mm
Size: 37.5 x 24.2 x 9.0mm
Certificate: CE0678, FCC ID:N4ZIA6COO, RCM
i-Bus port: Yes
Data acquisition port: Yes
Weight: 7.9g

1 x Turnigy Evolution
1 x TGY-iA6C Receiver (with leads)
1 x Micro USB Cable
1 x User Manual

Tags : radio transmitterturnigyturnigy evolution

The author admin

1 Comment

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.